SmartSource Pro Elite Plus

A regular check scanner today —
a network check scanner tomorrow

Future-proof your branch!

Convertible USB to Ethernet Capability

By default, the Pro Elite Plus works like a regular check scanner, over a regular USB connection to the teller workstation. That’s how most branches have things set up today.

Branches running thin-client workstations and virtual environments need special scanners with onboard intelligence, and the Pro Elite Plus has that, too. A firmware update activates this built-in capability and switches the scanner to communicate over an Ethernet connection as well.

Built-In Intelligence …

Network-ready check scanners have a small CPU and extra memory built in. It’s basically a small computer, similar to what’s inside a set-top streaming box like a Roku or a Chromecast.

It’s not a lot of computing power by desktop PC standards, but it’s plenty to run the scanner and handle functions like image compression independently of the host machine. That makes it perfect for running on thin-client workstations that are used in network environments, without any driver or operating-system conflicts.

To learn more about how scanners work in the modern networked bank branch, follow this link.

… With an On/Off Switch!

The Pro Elite Plus has most of its onboard computing functions turned off by default, so it works just like a USB-attached check scanner. But it’s got all the hardware to run as a network scanner, so it just needs to have network mode activated with a one-time (FREE) firmware update.

When you’re ready to take full advantage of the Pro Elite Plus’ network capabilities, all you need to do is switch the mode — you don’t have to buy a whole new scanner!

Buy Now, Get Peace of Mind

A convertible USB / Ethernet scanner is perfect for any bank or credit union that is thinking about switching to a thin-client network environment in the future but doesn’t have it set up now. Many financial institutions will hold off on replacing their equipment until after they move to a networked environment — or hold off on making IT changes until it’s time to buy new scanners. With a Pro Elite Plus, replacing equipment won’t be an issue; you just switch modes, and off you go!

Even better, the Pro Elite Plus in USB mode works just like a standard SmartSource Elite series device – so if you have existing scanners deployed, it will work right alongside them as if it was the same model. Compatibility issues are a thing of the past.

How Onboard Image Compression Stops Network Bottlenecks
Where the image processing happens makes a big difference!

There’s a lot going on in the diagram below, but the one thing that’s really important is the second column – whether or not your teller workstations can process images.

If they are thin-client workstations, they can’t do the processing, so something else has to do that step. That means the images have to be compressed either onboard the scanner itself, or on the remote server:

In a thin-client network environment, the teller workstation acts as a simple pass-through to the server running the teller application. This is a fancy way of saying that either the raw image-capture data has to be sent across the network, or the image has to be compressed and optimized before it reaches the network.

The problem with sending the raw data straight to the server is that each scanned check starts out as roughly a 2-3 MB file. That means a teller scanner running at full speed can churn out half a gigabyte or more of data per minute. That’s enough to take up all your network bandwidth, and then some.

By doing the compression onboard the scanner, each image is sent as a 10-20 KB black-and-white file – 100 times smaller than the raw file. That’s why an “intelligent” network scanner is important – it gives your network room to breathe!

Icons by Smashicon / flaticon.com